Published at Thursday, 08 November 2018. Armchair. By Joan Santos.
If you're gonna have a hard time to secure those screws, so just secure them properly make sure both sides are tied up, as I mentioned before, once you tighten one side and the other side become loose so make sure both sides are tied up Properly and the wing chair is almost done - is just a sitting part the mattress, and there is no fitting for it. You just pressed it in under the back part, and the chair is done. Okay, and this is it's not morning sure from IKEA
I have quite a hard time to put those screws in, so maybe you can try the other position. You're gonna see it in a moment see I press the screws in an if you grip if you grip will find the grip is fine. If not, maybe you should try something else. I put the chair upside down. As I did see. I did it with the electric screwdriver. I tried with a hand. I try to be the tube key which IKEA provide.
There is a tube key which IKEA provide. So just secure those two make sure you check one after another one when you tighten them up, because sometimes when you do one side, the other side gets loose so check that out legs. There's the car plastic washer, so just put it on. In this case, I did it wrong. I left it on purpose, so you can see you don't do the same mistake. So basically the back leg is longer and it's supposed to be the shorter one. I put the short at the front and lift back the long. One at the back, you're gonna see how it's gonna be so on this side. I did it right, so the longer leg is on the right place and the back is the small one. So one side is correct.
Any content, trademark’s, or other material that might be found on the rockysingh.com website that is not rockysingh.com’s property remains the copyright of its respective owner/s. In no way does rockysingh.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 rockysingh.com. All Rights Reserved.