Published at Thursday, November 08th 2018. by Joan Santos in Armchair.
There is a tube key which IKEA provide. So just secure those two make sure you check one after another one when you tighten them up, because sometimes when you do one side, the other side gets loose so check that out legs. There's the car plastic washer, so just put it on. In this case, I did it wrong. I left it on purpose, so you can see you don't do the same mistake. So basically the back leg is longer and it's supposed to be the shorter one. I put the short at the front and lift back the long. One at the back, you're gonna see how it's gonna be so on this side. I did it right, so the longer leg is on the right place and the back is the small one. So one side is correct.
The other one other side is wrong. I'm gonna find out very soon when I'm gonna put the chair up release to see. It is so I have to put the legs in the right position. That's mean the shorter legs they should be at the back and the longer one at the front. So you're not gonna do the same mistake a silly one. Okay - and we can do this side panels now so the side panel has a kind of hook on the top just hook it in there is a long hole on the side, just slide it in and press it down all the way. So the top they kind of line up nicely see it at the top of the wing chair and then you can put it on the side. I did it this way.
I have quite a hard time to put those screws in, so maybe you can try the other position. You're gonna see it in a moment see I press the screws in an if you grip if you grip will find the grip is fine. If not, maybe you should try something else. I put the chair upside down. As I did see. I did it with the electric screwdriver. I tried with a hand. I try to be the tube key which IKEA provide.
It didn't work. So then I put the chair upside down, make sure everything is pressed in properly and then it works. I just secured the toe, so those two screws without the problem not sure what the issue was exactly. I just didn't find the right hose or the way the screw was coming in, didn't work, so that side is done is just the two screws and the hook on the top. Exactly the same. On the other side, just the hook, the thing into the hole slide it down all the way. So the tops are lining up nicely push the wing up and then we can secure the two screws on the side. It's a one and another one, not sure I think in this case it was working on the side. I don't know why the other side didn't work, but maybe that's our option for you as well.
If you're gonna have a hard time to secure those screws, so just secure them properly make sure both sides are tied up, as I mentioned before, once you tighten one side and the other side become loose so make sure both sides are tied up Properly and the wing chair is almost done - is just a sitting part the mattress, and there is no fitting for it. You just pressed it in under the back part, and the chair is done. Okay, and this is it's not morning sure from IKEA
Any content, trademark’s, or other material that might be found on the rockysingh.com website that is not rockysingh.com’s property remains the copyright of its respective owner/s. In no way does rockysingh.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 rockysingh.com. All Rights Reserved.